RenoDeco.
Everything about the installation
RenoDeco is ideally suited for a quick and clean (partial) renovation or modernization of entire wall areas in the bathroom. Through simple processing with commercially available tools, the durable panels and profiles can be adapted directly on-site to the spatial conditions.
Proper processing
Quick and clean
Measuring
RenoDeco is ideally suited for a quick and clean (partial) renovation or modernization of entire wall areas in the bathroom.
Long cuts
Through simple processing with commercially available tools, the durable panels and profiles can be adapted on-site to spatial conditions.
Cutout
Using the optionally available mounting kit or surface adhesive, the decorative panels are applied directly to the load-bearing substrate such as tiles or plaster after sealing the wall. The substrate must be fully
load-bearing, level, free from dust and grease, and sealed against penetrating moisture. Please do not fasten dowels in the panel.
Beveling edges
After processing, remove sharp edges and deburr. Unsightly or defective areas are instantly replaced with decorative, maintenance-free, and durable wall surfaces.
Recommended bonding options
- 1-Component Special Adhesive
If you want to apply adhesive over the entire surface, use the 1-component special adhesive. This is delivered ready for use in a foil bag and is ideal for portioning. Furthermore, the 1-component special adhesive is approved for the QNG Ready seal of the Sentinel House Institute. This means that our RenoDeco wall coverings, including adhesive, are qualified for KfW funding for "Climate-Friendly Residential/Non-Residential Buildings."
- Mounting Kit
For optimal installation of RenoDeco decorative panels, HSK optionally supplies a specially assembled mounting kit, consisting of special adhesive, adhesive tape, and corresponding support wedges. This allows for particularly quick and easy bonding.
RenoDeco
Sealing system
Self-adhesive complete system for compliant sealing of wall and shower tray according to DIN 18534
Quantity specification for a room height of 2,500 mm:
A + B ≤ 2,400 mm: 1 × basic set
A + B > 2,400 mm: 2 × basic set
Self-adhesive complete system for the compliant sealing of walls and shower trays according to DIN 18534
Quantity specification for a room height of 2,500 mm:
2 × basic set
Self-adhesive complete system for compliant waterproofing of wall and shower tray according to DIN 18534
Quantity indication at a room height of 2,500 mm:
A + B ≤ 2,400 mm: 1 × base set and 1 × additional set
A + B > 2,400 mm: 2 × base sets and 1 × additional set
Self-adhesive complete system for compliant joint sealing of wall and shower tray according to DIN 18534
Quantity specification for a room height of 2,500 mm:
2 × basic set and 1 × supplementary set
Self-adhesive complete system for compliant composite sealing of walls and shower trays according to DIN 18534
Quantity specification for a room height of 2,500 mm:
A + B ≤ 2,400 mm: 1 × base set
A + B > 2,400 mm: 2 × base set
Self-adhesive complete system for compliant sealing of wall and shower tray according to DIN 18534
Quantity specification for a room height of 2,500 mm:
2 × base set
Basic set
The basic set enables sealing of common corner situations with a mounted shower tray or Dobla shower tray.
Set contents
· Sealing membrane, 10 m × 600 mm wide
· Corner sealing tape, 8 m × 100 mm wide
· Bathtub sealing tape, 2.6 m × 95 mm wide
· 2 × wall sleeves G1/2
· Hyon primer spray, 750 ml
· Squeegee
· 2 × cleaning wipes
Supplement set
The supplement set allows for sealing all installation situations with a floor-level shower tray in combination with the base set.
Set contents
· Bathtub sealing tape, 2.6 m × 95 mm wide
· Non-woven strips (for wet connections),
2.6 m × 60 mm wide
· 3 × flexible sealing corners
Perfect sealing to the wall
In wet areas, a seal against moisture must be applied to prevent mold growth and structural damage. With the RenoDeco sealing system, the entire shower area can be reliably and standards-compliantly sealed. The self-adhesive complete system can be easily and quickly installed on all substrates such as plaster, drywall, or old tile surfaces, without any drying times. This allows for immediate continuation with the installation of the RenoDeco decorative panels.
The advantages at a glance
- Standards-compliant composite sealing according to DIN 18534
- Self-adhesive sealing components
- Fast, safe, and clean processing without external trades
- No drying and waiting times
- Suitable for all substrates
Chat?